News RSS
General HANS FAQ
HANS FAQ It's easy to choose the right HANS Device for you. First choose the angle that matches your car, then choose the size (small, medium or large) most comfortable for your body.In all cases driver comfort is the deciding factor. General HANS FAQ Deciding on the Correct Angle and Size of HANS Device. Model 10 - Extreme Upright SeatFits many Sprint cars. Fits many people weighing under 75 lbs. in an upright seat. If you sit very upright and cannot get comfortable with a Model 20 try this Model. Model 20 - Upright SeatFits all sedans including NASCAR,...
HOW TO FIT A HELMET
HOW TO FIT A HELMET STEP 1 - MEASUREMENT Measuring the head is a starting point for the entire sizing procedure. Due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet. The circumference of the head should be measured a point approximately one inch above the eyebrows in front and at a point in the back of the head that results in the largest possible measurement. Take several measurements to make sure you have the largest one. Illustration 1 STEP 2 - POSITIONING Once you have...
HELMET CARE AND MAINTENANCE
Proper care and maintenance are important in keeping your helmet in race-ready condition. The following exterior and interior care recommendations will help assure your helmet functions properly and is in peak condition. EXTERIOR CARE All Bell Helmets are finished with a tough, polyurethane coating which resists scratching. When cleaning the exterior of your helmet, only use the highest quality products that are used for automotive finishes. It is up to the consumer to take great care of their helmet to assure no accidental damage is done to the helmet that may compromise the safety factor of the helmet. Do not...